When fixing problem lines on your Vizio TV, remember this is often a hardware issue. Start by updating the firmware and power cycling your TV, as these can fix software-related glitches causing lines. If the issue persists, consider hardware issues like faulty drivers or T-Con boards. Here are some common causes and how to fix them.

Cause 1. Malfunctioning Row and Column Drivers

Row and column drivers are essential for a clear display. They activate the individual pixels and adjust factors like brightness and color. Row drivers handle rows of pixels, while column drivers handle columns.

When a driver malfunctions, pixels can’t display properly, leading to lines. A bad row driver usually causes horizontal lines, while a bad column driver results in vertical lines. Issues can arise due to overheating, power surges, liquid exposure, or simply age.

If you see multiple vertical lines, it likely points to a deeper issue, as several column drivers would need to fail simultaneously.

Cause 2. Issues With Your T-Con Board

A T-Con board (Timing Control Board) manages the timing and coordination of signals controlling the display. It sends signals to row and column drivers, allowing pixel activation, brightness adjustments, and more. Without it, drivers wouldn’t know when to activate pixels.

Signs of a faulty T-Con board include:

• Horizontal and vertical lines
• Display flickering, or no display at all.

If you see only vertical lines, it’s likely a T-Con board issue rather than column drivers. However, intermittent or flickering lines can also be indicative of T-Con board problems.

Cause 3. Resolution Mismatches and Line Artifacts

Line artifacts are visual distortions that can appear as lines on your TV’s display. They result from mismatches between your TV’s native resolution and the content’s resolution.

If your TV’s native resolution is 1080p and you try to play a 4K video, the TV has to scale the image to fit the screen. Improper scaling may cause temporary artifacts, often manifesting as blockiness or blurriness rather than distinct horizontal or vertical lines. Persistent lines are more likely related to underlying hardware issues.

Start by resetting your TV to its default resolution and aspect ratio settings.

If the problem persists, try different settings. If adjusting these settings changes the location or appearance of the artifacts, it suggests a resolution or scaling issue.

However, if continuous lines remain unchanged, it’s more indicative of a hardware problem that may involve malfunctioning row or column drivers, or a faulty T-Con board.

Cause 4. Loose or Damaged HDMI Cables

If you have an HDMI cable running from your TV to the main source device, ensure it is firmly connected and shows no signs of wear or damage. A loose or damaged HDMI cable can cause various display issues, such as flickering, screen blackouts, or pixelation.

• Check both ends of the HDMI cable to ensure they are securely connected to both the TV and the source device (e.g., cable box, gaming console, or Blu-ray player).
• Inspect the cable for visible signs of wear, such as cuts, or fraying. Replace the cable if any damage is found.
• Try using a different HDMI cable to see if the issue persists.
• Switch to another HDMI port on the TV to rule out a faulty port.
• Ensure that the HDMI input source is correctly selected on your TV.

While these steps can help resolve many HDMI-related display issues, it’s important to note that persistent colored lines, particularly those that do not disappear after addressing the HDMI connection, usually indicate deeper hardware failures such as a faulty T-Con board or malfunctioning row/column drivers.

Cause 5. Damaged Screen

If your TV has a damaged screen from an impact, pressing too hard, or exposure to external elements, it will likely cause problem lines. Symptoms of a damaged screen can include visible cracks, patches of dead pixels, or persistent lines that are unaffected by settings adjustments.

In such cases, the screen itself needs replacing, often requiring a complete LCD replacement, which can be prohibitively expensive. Depending on the model and age of your TV, replacing the LCD might cost more than purchasing a new unit.

Before deciding on a replacement, it’s advisable to get a professional diagnosis to confirm that the screen is irreparably damaged and not another issue that could be less costly to fix.

Remember to check your TV’s warranty and contact Vizio support to see if repairs or replacements are covered, which could potentially save you money.

The post Why Is My Vizio TV Displaying Lines? Causes and Fixes Explained appeared first on Appuals.

In today’s fast-paced society, finding time for spiritual needs can be challenging. As a result, prayer apps have become essential for Christians wishing to deepen their relationship with God. This article discusses the top 5 free prayer apps, their features, and how they cater to your needs.

5 Best Prayer Apps For Free

When choosing a prayer app, remember that spirituality is deeply personal. We recommend trying each of these apps to see which one meets your needs best.

1. Hallow Prayer App: Building A Faithful Community

Platforms: Android, iOS | Price: Freemium | Rating: 4.9★

The Hallow Prayer app offers features and resources to deepen one’s faith and improve the quality of prayers. It provides guided prayer sessions, including traditional prayers like the Rosary, Divine Mercy Chaplet, and Stations of the Cross, and audio guides led by esteemed religious figures.

Users receive daily meditation and prayer prompts based on themes such as gratitude and forgiveness. The app also offers Bible narrations and short stories to strengthen one’s connection with the Bible.

The app also offers community options to pray in groups, share prayer intentions and goals, and submit prayer requests. It hosts events and challenges to foster a sense of belonging and shared spiritual growth.

• What we would like: A wider range of content catering to various Christian denominations and traditions.

Play Store

App Store

READ MORE: What is the Verses App? The Best Bible & Scriptures App ➜

2. Echo Prayer: Let Your Prayer Be Heard

Platforms: Android, iOS | Price: Freemium | Rating: 4.8★

The Echo Prayer app is ideal for believers seeking a more organized approach to their prayer life. It allows users to track prayer requests to ensure no prayer is forgotten. Users can also add notes to their prayer requests to remember their spiritual concerns.

You can share your prayer needs with other believers on the app through group prayer lists, making it easy to involve others in specific prayer requests. A unique feature is the ability to look back at past prayers and categorize them as “answered” or “no longer relevant” to see their impact on your life.

• What we would like: Enhanced privacy controls to protect personal data and prayer requests.

Play Store

App Store

READ MORE: What is Bionic Reading & Does It Actually Help You? [2024] ➜

3. PrayerMate: A Personalized Praying Experience

Platforms: Android, iOS | Price: Free | Rating: 4.8★

PrayerMate offers a personalized prayer experience, allowing users to create customizable prayer lists that reflect specific needs and spiritual priorities.

Users can set up categories and organize prayer requests by themes or individuals. This feature helps users keep track of prayer requests to ensure none go overlooked. Users can also set prayer reminders at suitable times to build a solid prayer habit.

The app includes a journaling feature for users to write down reflections related to their prayer life, encouraging deeper spiritual reflection and providing a record of one’s spiritual journey.

• What we would like: A feature to share prayer needs with other believers.

Play Store

App Store

READ MORE: The 5 Best Free Digital Planner Apps for ADHD in 2024 ➜

4. Prayminder: Never Forget Your Prayers

Platforms: Android, iOS | Price: Free | Rating: 4.8★

Prayminder provides timely prayer reminders so users never miss a prayer, helping them develop a prayer routine. The app sends notifications at specific times, customizable by the user. Users can also customize the frequency of notifications to ensure they are reminded more than once, if needed.

The app includes a “custom prayer prompts” feature, allowing users to add personalized messages to their prayer reminders, focusing on particular themes or prayer requests from friends or family members.

The app helps users track their prayers over time, providing insights into prayer habits and discipline. This feature encourages users to maintain a regular prayer routine by visualizing progress and setting personal goals.

Prayminder also works offline, ensuring reminders are received even without an internet connection. Additionally, users can schedule prayer reminders alongside daily tasks or calendar events, ensuring prayer time is balanced with other commitments.

• What we would like: Interactive features such as logging or journaling prayer experiences and tracking answered prayers.

Play Store

App Store

READ MORE: The 5 Best Free Digital Planner Apps for ADHD in 2024 ➜

5. Daily Prayer App: Helping You Commit to Daily Devotion

Platforms: Android, iOS | Price: Free | Rating: 4.2★

The Daily Prayer app offers tools to help users commit to daily devotion, including daily devotional content with Bible verses and inspirational quotes from Christian authors, theologians, and historical figures.

It also includes structured prayer guides to help users focus their prayers. These guides often follow specific themes, such as gratitude, forgiveness, or seeking guidance. The app pushes notifications to remind users of their prayer duties, helping them develop a prayer habit.

Moreover, the app has a user-friendly interface and allows offline content access. Users can customize their experience by selecting preferred themes, adjusting font sizes, and choosing specific types of content.

• What we would like: The app lacks personalization. Users with specific spiritual needs might find the content too generic.

Play Store

App Store

READ MORE: The 5 Best Free Digital Planner Apps for ADHD in 2024 ➜

The post Top 5 Free Prayer Apps Every Christian Should Install appeared first on Appuals.

Digital planners act as helpful tools, providing structure to your daily schedule. Through visuals, cards, to-do lists, and weekly calendars, these planners help people with ADHD stay organized and informed about their schedules.

Whether you want to manage class notes, personal planning, or large-scale team projects, our list of the 6 best digital planners has something for everyone. Let’s dive right in!

Questions to Ask Before Choosing a Digital Planner for ADHD

Before we get to the actual list, it’s important to ask yourself a few questions to help you choose a digital planner that fits your needs. With so many options available, it can be overwhelming to decide without a clear plan. Do you want something easy to use, a planner that provides everything in one space, or the ability to integrate with your existing apps?

• Why do you need a digital planner? To help with your studies, manage your daily schedule, or organize an entire team?
• Do you want something simple and easy to grasp, or are you looking for something more complex that offers tons of features?
• Is integration capability an important feature for you? Which other apps are you planning to integrate with your digital planner?
• Are you a creative person? Do you prefer something monotone or want a canvas to manage your tasks while being creative?
• Does the app give you rewards for motivation? Does feeling a sense of accomplishment help with your ADHD brain?

READ MORE: The 9 Best Alternatives to Doublelist You Need to Try in 2024 ➜

5 Best Digitial Planners For ADHD

Now that you have an idea of what you’re looking for in a digital planner, it’s time to get down to business. The following list is curated based on our own personal testing, reviews, and what others have found useful in tackling their ADHD challenges.

1. Todoist — The Simplest Planner

As the name suggests, Todoist is one of the most popular to-do list apps that helps you stay focused and improve your productivity. Todoist comes with a clean interface and allows users to manage tasks, plan activities, set priorities, add reminders, create custom labels, manage projects, and more. While some features are premium, the free plan offers enough to enjoy the app.

In terms of features, Todoist doesn’t have anything “special” in the free plan, and that’s not a bad thing. The app does what it’s intended to do and doesn’t constantly prompt you to Upgrade to Premium. Integration with Google Calendar and project templates help you stay organized.

There aren’t many negatives with the Todoist app; it’s excellent for anyone with ADHD or as a standalone organizational tool. While the premium plan offers additional features, it mainly builds on the basics. Todoist also has its own YouTube channel to help users get acquainted with everything.

• Pricing: Free and Premium Plan starting at $4/month.
• Available Platforms: Android, iOS, Mac, Windows
• Pros: User-friendly interface, plenty of features, no hidden payments.
• Cons: Not entirely free.

Check Out Todoist

2. Any.do — Productivity with Style

Any.do is a to-do list app like Todoist but with a much more modern and fluid design. The app offers everything you need to create your daily plan, from an intuitive dashboard to adding notes to grocery lists and a calendar to keep an eye on what’s next. With the free plan, you get the basics, but the premium plan offers advanced features, including AI.

One standout feature is the Moment option, which presents all your current tasks and helps you plan them effectively. You can assign each task to Today, move it to Later, or delete or mark it as complete. Apart from that, you also have integration capability with Google and Microsoft Calendar and the ability to add notes and attachments under your tasks.

Any.do performs well, and its extremely smooth UI enhances the user experience. However, unlike Todoist, Any.do places a stronger emphasis on upgrading to Premium. The premium plan offers features like AI-generated tasks and subtasks, adding team or family members, customized themes, and more.

• Pricing: Free and Premium Plan starting at $4/month.
• Available Platforms: Android, iOS, MacOS, Windows
• Pros: Modern user interface, integration capability, unique features.
• Cons: Premium-only features, fewer customization options.

Check Out Any.do

READ MORE: 25+ Best FREE iPhone Widgets in 2024: The Ultimate List! ➜

3. Google Calendar — Completely Free Planner

Google Calendar might have slipped under your radar, but if you’re looking for a tool to manage everyday tasks, plan events, handle meetings, and provide a simple scheduling solution, there’s no reason not to include Google Calendar in your list.

While Google Calendar is quite basic, it’s ideal for anyone who wants an easy-to-use planner. With just a click, you can start creating tasks and events. From adding attachments and locations to inviting people and including Google Meet links, each of your tasks gets the details it needs.

Whether you want to focus on individual tasks or get an overview of your entire schedule, Google Calendar does it all. Additionally, the ability to sync seamlessly between your mobile and laptop devices ensures you don’t miss anything. The only drawback is that the new Appointment feature is available only to GoogleOne users.

• Pricing: Free
• Available Platforms: Android, iOS, Mac, Windows
• Pros: Easy to use, collaboration options, add locations to events, embed Google Meet links.
• Cons: Appointment feature requires a GoogleOne subscription.

Check Out Google Calendar

4. Trello — Team Management Made Easy

Trello is a beginner-friendly, Kanban-based project management tool that helps you visualize tasks through intuitive cards and columns. Its straightforward UI provides a clear overview of what needs to be done. Trello is focused on team managers as it allows them to maintain schedules while efficiently managing multiple boards simultaneously.

For a free tool, Trello has interesting features, the two highlights being Power-Ups and Automation. Power-ups are add-ons to your boards and allow you to integrate apps like Gmail, Slack, Microsoft Teams, and more. Automation allows you to speed up your work by setting up specific actions, creating custom buttons, and generating email reports.

Trello’s drag-and-drop interface, templates, attachment options, and organization system make it an excellent choice for managing multiple tasks and team members. However, adding more than 10 projects requires a subscription, which may be limiting for larger teams. Despite this, Trello fulfills its role as a simple and easy-to-use management tool well.

• Pricing: Free and Premium Plan starting at $5/month.
• Available Platforms: Android, iOS, Mac, Windows
• Pros: Simple and easy to use, extensions, automation features, drag-and-drop interface.
• Cons: Limited projects, premium-only features, too much work for simple planning.

Check Out Trello

READ MORE: 30 Fun & Unique Time Pass Websites to Visit When Bored ➜

5. Notion — All-in-One Planner

Notion is one of the most versatile and popular planning apps in the productivity market. Backed by productivity gurus like Ali Abdaal, Notion combines note-taking, task management, and student planning into a single, user-friendly interface. Whether you are a student, team member, or just someone who wants to keep track of everything, Notion provides a clean space to think, write, and plan.

While one of Notion’s recent marketing points is its AI assistance, unfortunately, this feature comes at a cost. However, the ability to integrate with several apps like IFTTT, Typeform, Zapier, and more adds a level of automation that enhances its functionality. Notion allows you to create workspaces that fit your needs, and the vast collection of templates gives you the freedom to be as creative as you want.

Notion has a lot to offer, but unlike apps like Todoist or Trello, which are easy to grasp, Notion does come with a learning curve. However, if you’re willing to invest the time to learn and customize the app, Notion provides unparalleled flexibility and functionality.

• Pricing: Free and Premium Plan starting at $8/month.
• Available Platforms: Android, iOS, iPad, Mac, Windows.
• Pros: Offers something for everyone, a clean interface, integration, and template collection.
• Cons: Takes time to learn, premium-only features.

Check Out Notion

6. Lunatask — Made For ADHD Brains

Lunatask is one of the few planners that not only offers end-to-end encryption but is also designed specifically for people with ADHD. It is an all-in-one digital planner that combines task management, habit tracking, journaling, and more into a single, user-friendly platform. With an ADHD-focused design, Lunatask helps overcome mental clutter and keeps everything you need in one place.

What makes Lunatask great isn’t just a single feature; it’s the combination of intelligent task prioritization, a visual habit tracker, and integrated mood and energy level monitoring that makes Lunatask a worthy contender. By utilizing various productivity techniques like Kanban boards, the Eisenhower Matrix, and Pomodoro timers, Lunatask ensures that it adapts to your behavior and lifestyle.

While Lunatask works great on desktop, the mobile app is still in beta, requiring users to sign up separately. Another area for improvement is the Kanban feature, which could be more intuitive. Despite these minor drawbacks, Lunatask offers a great planning experience and helps you better manage the challenges of ADHD.

• Pricing: Free and Premium Plan starting at $5/month.
• Available Platforms: Windows and MacOS with mobile app in beta
• Pros: All-in-one digital planner, ADHD-focused design, implements various productivity techniques.
• Cons: Mobile app still in beta, Kanban feature needs improvement.

READ MORE: The 7 Best Android Auto Apps of 2024 [Ultimate List] ➜

Honorable Mentions

If you were searching for a planner to manage your team, handle daily tasks, and stay focused, you’ve likely found the right one from the list above. However, if you haven’t or have already tried these options but want something new, creative, and fun, the honorable mentions are just for you.

7. AFFiNE — Creativity Meets Productivity

AFFiNE is an open-source, secure option that allows you to be creative and productive at once. The app offers two view modes: Page and Edgeless. Page mode is similar to a Notion note-taking space with various editing options. But Edgeless takes it to the next level, providing an infinite canvas for brainstorming and mind mapping, offering creativity without costing a penny.

Though the app is fairly new and still has areas that need improvement, AFFiNE has shown significant progress over time. Currently, AFFiNE is only available for desktop users seeking a creative approach to note-taking and task management.

Check Out AFFiNE

8. Numo — Fun ADHD Planner

The concept behind Numo is simple: a to-do list to help manage your tasks and maintain routines. What sets it apart is the connection to a community of people with ADHD, where users share experiences, queries, polls, and more. Numo also features a Reward and Karma system similar to Todoist but with better rewards, including unlockable themes and app icons.

However, to unlock the full experience, including joining Teams based on your vibe, accessing Numo Stories, and adding your posts, you’ll need a premium subscription. The good news is that they offer a 30-day free trial, so you can see how these features enhance the overall experience.

Check Out Numo

Bonus: Digital Planners vs Paper Planners

When it comes to planning and organizing, both digital planners and paper planners have their unique strengths. Digital planners offer a flexible and convenient experience, allowing you to integrate with other apps, access your plans across multiple devices, and even work offline. With features like reminders, templates, and visual aids, digital planners help you manage your schedule efficiently, ensuring you stay on track.

On the other hand, paper planners provide a much more personal experience. The act of writing by hand can not only help you journal your thoughts but also allow you to process information more deeply and connect with your tasks on a more meaningful level. Paper planners also eliminate the distractions that come with digital devices, helping some people stay focused and mindful as they plan their days.

Ultimately, the choice between digital and paper planners depends on personal preference and lifestyle. If you value portability and tech integration, digital planners might be the way to go. However, if you appreciate the simplicity and mindfulness of writing things down, a paper planner could be more your style.

READ MORE: The 8 Best Fitness Apps for Android in 2024: Ultimate List ➜

Goodbye ADHD, Hello Productivity!

Being productive isn’t just about always doing something important; it’s about managing your tasks and creating a balance between work and personal life. With the help of a digital planner, you can expect to be more focused, time-managed, and productive, all while giving yourself some breathing room.

We hope this article has helped you understand your planner needs and guided you in picking the right one. So, what are you waiting for? There’s a to-do list waiting to be filled!

The post The 5 Best Free Digital Planner Apps for ADHD appeared first on Appuals.

These drivers, now a standard for all Windows 11 devices, offer a smoother, more responsive experience, making touchpad interactions more intuitive and precise. In this article we will look into precision drivers, explaining what they are, their key features, and how to install them. 

What Are Precision Drivers?

During the Windows 8.1 era, Apple dominated the touchpad experience, with no Windows laptop coming close in comparison. To address this gap, Microsoft introduced a set of unique drivers known as “Precision Touchpad” drivers.

These drivers were designed to standardize the touchpad experience across all Windows devices, providing smoother, more consistent, and responsive performance to rival Apple’s superior touchpad technology.

Precision drivers were first introduced in Surface Laptop 2 and have since become part of the Microsoft Surface lineup. Moreover, due to its overwhelming success precision drivers have become a requirement for Windows 11.

What makes precision drivers so adaptive and accurate is the fact that they come with drivers that are regularly upgraded. This ensures that the drivers are bug-free, up-to-date with the latest technology, and well-optimized.

READ MORE: Best Laptop for Working From Home in 2024 ➜

How Do Precision Drivers Work?

Precision touchpads use a diving board-like surface that has moving parts underneath it and falls a little when it’s clicked hence the name “diving board“. The touchpad is integrated with software and hardware on your computer to deliver a precise and responsive user experience. Additionally, the driver’s sensitivity settings are highly customizable allowing for precise control of cursor movements. 

The touchpad also comes with a new type of technology called “Palm Detection Technology“. This helps the computer differentiate between intentional movements on the touchpad and accidental contact from either the wrist or the palm.

To further enhance the user experience, precision drivers are also capable of recognizing Multi-Touch Gestures such as two-finger scrolling, pinch-to-zoom, and three or four finger swipes. Thus, allowing users to perform multiple tasks by simply interacting with the touchpad.

READ MORE: How to Fix Touch Gestures Not Working in Windows 11? ➜

Why are Precision Drivers Updates Important?

Regular upgrades to the precision drivers serve a lot of important purposes. Following is a brief list of each:

1. Improved Performance

New updates help optimize the driver’s performance and reduce input lag, thus making the touchpad more responsive ensuring a smoother user experience. Moreover, updates can also help make the drivers more accurate, making navigation easier for the users.

2. Bug Fixes

Bugs are a real threat when it comes to software as they can disrupt your entire user experience causing issues like inaccurate navigation or reduced responsiveness. Updates act as a crucial way of fixing minor bugs faced by users and maintaining a reliable and functional touchpad experience.

3. Ensuring Compatibility

Computer hardware goes through changes and upgrades all the time, so it’s essential that your laptop’s drivers keep up with these changes and continue to work seamlessly with the latest hardware on the market.

Furthermore, OS updates also change the way computers communicate with drivers. Therefore, to ensure compatibility with new system updates and hardware, it’s crucial to regularly update your Precision drivers.

4. Introducing New Features

Updates are an effective way to introduce new features and enhance the overall functionality of Precision drivers without the need to completely overhaul or replace them. Updates have been a significant part of Precision Driver’s history and have brought about a lot of useful features for the users. Here’s a brief list of some of the features that were added over the years through driver updates:

• The Windows 10 Anniversary Update in 2016 introduced advanced gestures such as a Three-finger swipe for task view, a four-finger swipe for switching desktops, and customizable gestures
• In 2017 the Windows 10 Fall Update introduced customizable gestures allowing users to now customize 3 or 4-finger gestures.
• The Windows 10 April 2018 Update built upon the previous update and gave the users enhanced options to configure gestures.
• In 2020 a Windows 10 Update added additional customization options for touchpad gestures.
• The latest update in 2023 integrated AI in the touchpad for even better gesture recognition.

READ MORE: Touchpad not Working after Windows 11 Update? Try these fixes ➜

How To Check If Your Laptop Has Precision Drivers?

If you own a Windows 11 laptop then there’s no need to check for Precision Drivers as they are pre-installed in all Windows 11 devices. However, this is not the case for Windows 10 laptops; they may or may not come with Precision Drivers installed. So, here’s a quick guide to check whether your laptop has them installed.

1. Click on the Windows button on the Taskbar and go to Settings. 
   

   

2. Navigate the the “Devices” tab.
   

   

3. Click on the “Touchpad” button. Now if your PC does have a Precision Touchpad you should see a note saying “Your PC has a precision touchpad” at the top of the window.
   

   

READ MORE: How to Turn Off Windows 11 Upgrade Screen in Windows 10? ➜

How to Install Precision Drivers on Your Laptop

If your laptop doesn’t currently have precision drivers there’s a way to switch to them. Regardless of what drivers your laptop currently has (Elan or Synaptics), it’s possible to switch to precision drivers because all the drivers use the same hardware.

1. Prerequisites

Before we get to installing the Precision drivers, you first have to figure out the type of touchpad your laptop is currently using as each touchpad needs different Precision Drivers. For this, you’ll need to open up the Device Manager and here you will see a list of peripheral devices. Expand the “mice and other pointing device” one and see what type your current touchpad is.

Once you have your current touchpad in mind, you’ll need to head to the respective website and download the precision drivers from there. Here’s the link for both of these to help you out:

• For Synaptics: Download Synaptics Precision Drivers.
• For ELAN: Download ELAN Precision Drivers

2. Installation

After you have downloaded the drivers from the website, your last step is to install them on your computer. Here’s how that is done:

1. Extract the downloaded driver files to a folder.
   

   

2. In Device Manager, right-click your touchpad device and select “Update driver“.
   

   

3. Choose “Browse my computer for driver software“.
   

   

4. Navigate to the folder where you extracted the drivers and select it.
   

   

5. Follow the on-screen instructions to complete the installation.
6. After the installation is complete restart your laptop to apply the changes and you are done!

READ MORE: 6 Easy Fixes for When Your Laptop is Stuck Restarting [2024] ➜

Precision Drivers vs. Elan and Synaptic Drivers

Precision drivers are the latest drivers introduced by Windows and have a range of benefits over its other two counterparts. The key differences between the Precision Drivers and Elan And Synaptic drivers are as follows:

1. Integration and Compatibility

The first major difference between the three is integrated with Windows. Precision drivers are developed by Windows itself and therefore are well integrated in all of their products. On the other hand, Elan and Synaptic Drivers are developed by third-party manufacturers, which means their integration with Windows is pretty limited.

Another noticeable difference between the three is compatibility. Due to being developed by Windows, Precision Drivers are compatible with a wide range of devices. Whereas. Elan and Synaptics drivers are designed to work with specific devices, such as the Acer Aspire Series, Lenovo IdeaPad Series, HP Pavilion Series, and Dell Inspiron Series, respectively.

2. Gesture Support and Customization 

A major reason why the Precision Drivers stand out from other drives is its huge gesture support- allowing users to perform multiple complex actions via the touchpad. Precision Drivers offer extensive support for multi-finger gestures, including three and four-finger swipes, taps, and pinches.

Elan and Synaptic drivers lag in that regard as they only offer basic gesture support. On top of that, Precision Drivers allow the users to customize gestures according to their needs and preferences; something the other two drivers don’t offer.

3. Responsiveness

As the name suggests Precision Drivers are highly accurate and responsive. They come with a very high sensitivity so even the slightest of touches don’t go unnoticed. Elan and Synaptic drivers on the other hand, although pretty decent, come nowhere near to the level of responsiveness that Precision Drivers offer and are considered inferior in this regard.

READ MORE: Forgot Password to your HP Laptop? Try This Trick to Unlock! ➜

Wrapping Up

Precision Drivers are Microsoft’s attempt to improve the everyday touchpad experience. They offer enhanced responsiveness, touch sensitivity, and new gesture features, setting them apart from other drivers. While most newer Windows devices come with Precision Drivers pre-installed, you can easily install them on your device if yours didn’t by following the steps outlined in this article.

The post What Are Precision Drivers and How to Install Them? [2024] appeared first on Appuals.

That is where Breeding comes into play. Breeding in Palworld lets you hatch powerful Pals and even access late-game Pals much earlier in your journey. In this article, we will teach you everything about breeding Pals in Palworld. We’ll start with the basics and move on to picking the best pals for breeding, best breeding combos, and more. So, without further ado let’s make some epic Pals.

How Breeding Works in Palworld

Breeding is a core mechanic in Palworld, and while you might already know the basics, there are a few details worth noting. In Palworld, there are four types of skills: Active, Exclusive, Boss Exclusive, and Passive. While all are important, we’ll focus on Passive Skills, as these, along with a Pal’s stats, play a key role in breeding. Let’s take a closer look at both.

The Passive Skills

Each Pal has certain passive skills that can provide buffs or debuffs to the player or Pal. When you breed two Pals, their offspring have a chance to inherit some of these skills. For example, if you breed an Eikthyrdeer with the Swift skill and a Fenglope with the Runner skill, the resulting Loupmoon might inherit Swift, Runner, or even both. However, it’s not a straightforward 50-50 split.

Instead, the game uses a weighted system, meaning certain dominant traits are likely to be passed down, while rare or powerful skills have a lower chance. Hence, if you are aiming to pass on specific passive skills, it’s best to breed with a Pal that doesn’t have any passive skills. This increases the chances of your desired skills being inherited by the offspring.

The Stats

In addition to passive skills, the offspring’s stats, such as HP, Attack, and Defense, are also influenced by their parents’ stats. The stronger the parents, the better the base stats of the child. However, just when you start to get things, there’s an element of randomness and mutations that can introduce new skills or traits that neither parent had, making it difficult to create the perfect pal with the ideal skill set.

READ MORE: 5 Easy Fixes for “Session Search Error” in Palworld [2024] ➜

Basics of Breeding Pals in Palworld

Breeding in Palworld is all about experimenting with different Pals to get the skills and stats you want. The more you understand the traits and abilities of your Pals, the better and more accurate results you can get. Now, with that in mind, how do you start breeding? let’s look at a step-by-step guide about breeding Pals in Palworld.

Step 1. Build a Breeding Farm

To start breeding in Palworld, you will first need to build a Breeding Farm. This will require you to hit Level 19 and 2 Technology Points which will unlock the breeding farm blueprint in the Technology menu. Once unlocked, you’ll need to following resources to complete your build:

• 100x Wood
• 20x Stone
• 50x Fibre

Keep in mind that the breeding farm does take up quite some space, so make sure your base has enough room for it.

READ MORE: How to Fix the Disk Write Error When Launching Palworld ➜

Step 2. Bake Cakes

Once the Breeding Farm is ready, the next step is to bake a few Cakes. For that, first make a Cooking Pot, which unlocks at Research Level 17, and gather resources like wood, ingots, and flame. You’ll also need a Mill and a Wheat plantation, both of which should unlock at Level 15. The Mill will allow you to turn Wheat from your Wheat plantation into Flour—a core ingredient in baking Cakes.

To start baking cakes using the Cooking Pot, you’ll need the following five ingredients:

• Five flour
• Eight red berries
• Seven milk
• Eight eggs
• Two honey

READ MORE: Step-by-Step: How to Make Teriyaki Salmon in Dreamlight Valley ➜

Bonus Step 1: Gathering the Required Ingredients

If you’re scratching your head trying to figure out where to get all these ingredients, we have got you covered! To get the Flour, we already have the Mill set up, and while you can gather the rest from the wild, that’s no fun. Instead, let’s make an efficient system to farm these materials.

For berries, you can create a Berry Farm, which unlocks early on at Level 5. You’ll need some resources and Berry Seeds, which you can obtain by harvesting Berry Bushes. Next, for eggs, milk, and honey, you’ll need to build a Ranch which unlocks at Level 5 and is built using Technology points and resources. Once the Ranch is ready, you can assign the following Pals there for specific resources:

• Chickipee (Egg)
• Mozzarina (Milk)
• Beegarde (Honey)

Last but not least, don’t forget to build a Cooler. Cakes don’t last long once made, so to extend their freshness, a Cooler Box assisted by a Pengullet or Chillet can be quite helpful. Also, you might have to manually pick up your cakes from the Feedbox to the Cooler Box.

READ MORE: How to Fix Palworld Auto and Manual Saving Feature Not Working? ➜

Bonus Step 2: Getting a Jormuntide Ignis Early

When it comes to breeding Pals, you are going to need a lot of cakes and while we have a system taking care of all the resources, one last thing to speed up is the cooking process. For that, you will need to get your hands on a Jormuntide Ignis and yes you can get them early in the game. Here’s how:

1. Before starting the search, make sure you have heat-resistant armor, such as the Tropical Outfit or Heat Resistant Pelt Armor. You can also use a heat-resistant undershirt as long as you have heat resistance level two on it. 
   

   

2. Next, you are going to need access to a Flyer. Any flyer will work, such as the Nitewing that you will unlock first.
   

   

3. From here, you are going to head towards the Volcano Biome on the southwest corner of the map.
   

   

4. Once you reach the biome, you should start searching for a “huge dragon egg” which is a purple and black egg. These eggs spawn all over the biome so keep going around until you see one.
   

   

5. And that’s it! Once the egg hatches, you’ll have a Jormuntide Ignis to help speed up your cake-baking process. 
   

   

Screenshots taken from TagBackTV

READ MORE: Stardew Valley: Lost and Found Box & How It Works [2024] ➜

Step 3. Time for the Lovebirds to Meet

After baking your cakes, it’s time to start breeding your Pals. Before we get to that, there are a few prerequisites to handle. First, place your cakes in the chest attached to the breeding farm. Next, toss one male and one female Pal into the breeding area. Each cake in the chest will produce one egg, and since cakes don’t spoil in the farm chest, you can store several without concern.

As and when you have all the necessary things ready, a progress wheel should automatically start to fill up. Give the Pals some space and come back later to check the progress. Once complete, you will have an egg ready to collect. Place the egg in the Incubator and you should be able to hatch it.

READ MORE: How to Resolve Multiplayer Not Working Issue in Palworld? ➜

Breeding Combos and Breeding Calculators

Breeding combos are a fun way to unlock specific Pals and complete your Paldex. But how do they work? Each Pal has a hidden “breeding power” number ranging from 10 to 1500. This number not only helps determine the rarity of the Pal (with lower numbers indicating rarer Pals) but also plays a crucial role in the working of breeding combos.

By using a simple formula this breeding power allows you to figure out what Pal species you are going to get from breeding two Pals. Add the breeding power numbers of the two Pals, average the result, and round it to the nearest whole number. This number will indicate the Pal that will hatch from the egg. But you don’t have to worry about the maths as that is what Breeding Calculators handle.

Breeding Calculators allow you to simply select any two Pals and find out what offspring you can get by breeding them. All you have to do is select Parent A and Parent B and the calculator will automatically give you the results. These breeding calculators have several other useful features like Multipal Breeder, Parent Calculator, and more so make sure to thoroughly look at all of them.

And that’s not all, the world of breeding combos in Palworld is vast and comes with certain exceptions and rules. So, if you want to get a complete overview regarding breeding combos, we highly recommend checking out Blahable’s post on r/Palworld — the first person to figure out this whole thing.

READ MORE: How To Play Cookie Clicker in School [Cookie Clicker Unblocked] ➜

The 8 Best Breeding Combinations in Palworld

Breeding in Palworld can be overwhelming, especially with over 18,000 possible combinations. While experimenting with different Pals can be fun, it can also be resource-intensive. So if you are looking to get some powerful pals without having to go through a chain of breeding, we’ve curated a list of the 8 best breeding combinations that are worth trying.

READ MORE: How to Fix Palworld Stuck on Loading Screen? ➜

Start Breeding Your Pals!

Breeding in video games has long been a favorite feature, with mobile games like Dragon City and Monster Legends being among the first to introduce this concept. Palworld takes players on a similar journey but with a lot more possibilities and combinations to explore. It’s hard to get bored once you get the hang of it. We hope this guide has covered all your queries about breeding Pals in Palworld and you are now ready to hatch some eggs!

The post Palworld Breeding Guide: From Basics to Best Combos [2024] appeared first on Appuals.

What is Cookie Clicker?

Cookie Clicker is a browser-based game where your objective is to keep clicking on the giant cookie to generate “cookie coins“. These cookie coins allow you to purchase different kinds of upgrades that reward you by increasing your cookie production per second. From clicks to grandmas to farms, the game has a variety of different upgrades and the cost for these upgrades increases as you progress.

While the game has a pretty simple concept, the incremental progression and hundreds of upgrades make it addictive enough to pass a few hours. The game also keeps upgrades hidden until you reach a specific amount of cookie coins to keep players hooked as much as possible. After a while, the game does get repetitive but for the first few sessions, it’s quite engaging.

READ MORE: How to Play Fortnite on a School Chromebook in 2024? ➜

How To Play Cookie Clicker

Since Cookie Clicker is mainly a browser game, it’s pretty easy to access it. Simply type in the name, click on the first URL, and start clicking. However, some schools and workplaces have strict restrictions on such websites, making it difficult to access the game on their networks or systems. To help you with that, we have gathered up 3 different methods that can help you play Cookie Clicker.

1. Find an Unblocked Version of the Game

One of the best ways to play Cookie Clicker is by searching for an unblocked version of the game. Since Cookie Clicker has been around for 10+ years, it’s pretty common to see third-party websites recreate the game with all the features from the original one and publish it.

While there are several unblocked versions available, one that worked for us is this “Cookie Clicker Unblocked“. However, if this doesn’t work for you try searching for another one as there are a few options there.

READ MORE: The Most Popular & Best IO Games to Play in 2024 ➜

2. Use a Proxy Site

If you can’t find an unblocked version of Cookie clicker or for some reason it doesn’t work, you can use proxy websites. Proxy websites help users bypass network restrictions and access blocked websites. You can use Proxy sites like PlainProxies and CroxyProxy.

Here, all you have to do is simply copy the original cookie-clicker URL and paste it into the box on the Proxy site. As and when you hit the Browse button, the cookie-clicker website should open up through the Proxy site.

READ MORE: How to Use A Proxy With Telegram in 2024 – Best Proxy Providers ➜

3. Use a VPN

VPNs can enable you to connect to servers outside the school’s network, allowing access to blocked games. You can either install the VPN on your computer or use Chrome extensions. Once you have a VPN ready, turn it on and you should be able to access Cookie Clicker without any restrictions. However, before installing any software on a school computer, check if your school permits it.

READ MORE: How to Install a VPN on a School Computer? ➜

4. Try Cookie Clicker Mobile

For those of you on a mobile device and not on the school system, you can play Cookie Clicker by simply installing it on your phone. If you are on an Android device, search for Cookie Clicker on the Google Play Store and install the first one that pops up. This game is identical to the browser version, so you won’t need to adjust to anything new.

On the other hand, the App Store on iPhone doesn’t offer this exact version of the game. Instead, you’ll find other options with a similar concept, though they may differ in some ways. While there will be some new elements, you should be able to adapt quickly.

READ MORE: Definitive Cookie Clicker Ascension Guide for All Skill Levels ➜

How Do Schools Block Websites?

Schools block cookie clickers and other similar games and websites through various methods. Here’s a list of the most commonly used methods.

1. Web Filtering Software

Schools can use web filters to deny access to websites that contain certain keywords in the URL. In this case, if the URL entered contains the words “Cookie Clicker” the site will be automatically blocked.

Another common method for blocking website access is through URL blockers. Web filtering software can be set up to block specific URLs based on their domain names, preventing users from reaching certain websites altogether.

READ MORE: How to Block Adult Websites on Your Phone Forever [2024] ➜

2. Monitoring and Alerts

Schools use software such as firewalls to monitor the flow of traffic to and from the computer to detect unauthorized activity. If a student attempts to access a blocked site the system can automatically alert the school administration.

3. Browser Restrictions

To prevent students from using VPNs and Proxy servers that can allow them to access blocked sites, schools restrict the installation of browser extensions and add-ons. This limits the ability to download such extensions and bypass restrictions.

READ MORE: 21 Good Ass Browser Games to Try in 2024 – All Genres ➜

Wrapping Up

Playing Cookie Clicker unblocked can be straightforward with the methods mentioned above. While most of these methods are safe, it’s crucial to use trusted sources when installing VPNs and browser add-ons, especially on devices that contain important data. Remember, school is a place for learning, so it’s best to enjoy games only during your free time and not let them interfere with your studies.

The post How To Play Cookie Clicker in School [Cookie Clicker Unblocked] appeared first on Appuals.

But how do you open and access Torrent files? Whether you’re using Windows, Mac, or an Android device, there are several easy-to-use applications available. In this article, we will explore how to open torrent files on different platforms and the best tools to use.

What is a Torrent file?

A Torrent file is used by major Peer-to-peer file-sharing protocols such as BitTorrent and allows users to directly transfer files between each other without the need for a central server. This reduces the central cost as there is no need to set up a server which requires significant hardware resources.  

The torrent file contains the metadata of the files which are to be transferred. A Torrent file is mainly composed of the following parts:

1. Meta Data: The Meta Data contains details related to the file such as its size, type, and name.
2. Trackers:  Trackers help the files reach their destination by tracking the peers on a network. A Torrent file stores the URLs of several trackers.
3. Piece Information: A file is divided into pieces, the Torrent file stores the information about each piece.
4. Hash Values: Hash values are used to uniquely identify each piece to ensure data integrity.

READ MORE: What is qBittorrent & Is it Actually Safe to Use in 2024? ➜

How to Open Torrent Files on Windows 10/11

To open Torrent files you will first need to download a Torrent client such as uTorrent. Go to their website and select the free download option unless you want the paid one which offers some additional features. Once the download is complete open the file and follow the onscreen instructions to install and set uTorrent on your computer.

1. Now download a Torrent file from any website or through a direct link if you can get one. Ensure you have the right to download the file and avoid using pirated websites as it can damage your computer.
2. To open the Torrent file, simply navigate to the location where you saved the Torrent file and double-click on the file and Utorrent will automatically open it.
   

   

3. To start the download you have to select the file location where you want to save the file and press OK when prompted.
   

   

READ MORE: Optimize uTorrent – Boost Download Speed & Efficiency ➜

How to Open Torrent Files on Mac and Linux

Opening torrent files on both Mac and Linux is simple with the Transmission app, a reliable and user-friendly torrent client available for both platforms. Here’s a quick guide to get you started:

1. Visit the official Transmission website and download the appropriate version for your Mac or Linux system. Once downloaded, follow the on-screen instructions to install the app.
   

   

2. From here, the steps are pretty much the same as opening torrent files on Windows. Simply, download your desired torrent file and open it up.
3. Transmission will automatically take care of the rest, all you have to do is hit the Open button.
   

   

READ MORE: How to Troubleshoot Stalled Download Issues in qBittorrent? ➜

How to Open Torrent on Android

If you are on an Android device, opening up torrent files is pretty simple as you only need to download a torrent downloader from the Google Play Store. Here’s a quick rundown to opening torrent file on a Mobile:

1. For Android devices, you can download the “uTorrent” app from the Play Store. 
   

   

    
2. Once you’ve downloaded the Torrent client apps, download your Torrent files. Next, navigate to the file manager or downloads app on your phone and tap on the Torrent file to open it.
   

   

3. As and when you open the file, uTorrent should automatically open up. Here, press the tick option and your torrent file should start downloading.
   

   

READ MORE: How to Completely Uninstall uTorrent from Your Windows PC? ➜

Wrapping it up

Opening a Torrent file on any system is a pretty straightforward procedure and can be completed within minutes. Just make sure you don’t use any cracked software or illegal websites for the process as it could cause serious harm to your device. Just follow the steps outlined in this article and you should be good.

The post How to Open Torrent Files on Windows, Mac, and Android? appeared first on Appuals.

But the Internet didn’t just stop there. In a recent video published by DogPack404, a former MrBeast employee, he accuses him of rigging videos, running fake lotteries, doing false advertisements, and more. DogPack also shows evidence for this behavior and says all this is intentional and not a mistake. You can check out the full video below:

Just as MrBeast is Already Under the Pile

With everything MrBeast has been facing, this video seems to drop just as when this drama is at its peak, coincidence? At the beginning of the video, the creator adds a post clip where he says “I recorded this before the Kris stuff came out” and he was going to make a video on that as well.

To add to that, the hour-long video features several edits which would mean that the video was in the pipeline for 2-3 weeks. After everything started to unfold, the creator must have rushed the process to publish the video as soon as possible so it doesn’t look like a way to grab views. To support this, the video is not monetized and is for educational purposes only.

Faking Videos

DogPack moves on to show how MrBeast apparently “fakes” his videos and then proceeds to show clips of him using CGI. However, explosions, throwing cars, train crashes, digitally elevated heights, and more help add a sense of cinematic flair to his content and can’t be titled as faking videos.

On the contrary, the video shows a clip from one of MrBeast’s videos where they appear to be stranded at sea, which does seem scripted. In the clip, the beds where MrBeast and his friends are supposed to be sleeping, but for a moment, the tent cover blows open, revealing the beds are empty. After a cut, five people magically appear in the tent and are seen coming out.

Rigging Challenges and Planting Contestants

In one of the challenges “100 Boys vs 100 Girls For $500,000,” MrBeast repeatedly calls the contestants random. But some of the contestants on the girls’ side featured Jimmy’s hiring manager, recruiting coordinator, and even his girlfriend.

However, according to a short-term MrBeast employee, MrBeast didn’t have enough girls and that’s why a few members of the crew stepped in to balance the teams. The employee also says that the results of these videos were scripted and that it would be a “PR problem” if the boys won by a lot.

On the subject of fake contestants, DogPack also says that almost none of the contestants are random and most are either employees or friends and family of the people with MrBeast. He adds that most of the contestants are usually “in the industry, media-trained, and built a following“. Rosanna Pansino talks about rigged results in MrBeast’s videos in the H3 Podcast Highlights.

In the Creator Games hide-and-seek video, they had an approximate location of everyone and the winner broke the rules but was not eliminated.

Rosanna Pansino

Exposing Mac Hopkin’s Real Identity

Mac Hopkins is one of the newest editions in the MrBeast crew whom people have been calling the “Old Chris“. However, Mac isn’t just a random guy. Mac Hopkins was formerly affiliated with Airrack — an American YouTuber known for his pranks and challenges. This means that was also media trained, knew how to act on camera, and was already known in the industry.

Before his appearance in the “World’s Most Dangerous Trap” video, DogPack shows that Mac moved from California to Greenville North Carolina where Jimmy lives. Mac did his relocation back in August 2023, two months before the video went live in October 2023. On top of that, Mac allegedly moved to a “Million Dollar Mansion” which included a movie theater and 7 bathrooms.

And that’s not it. Mac Hopkins has previously also appeared in MrBeast’s “Last To Leave Circle Wins $500,000” video. In fact, he turned out to be the first person to leave the circle and proceeded to win a brand-new car. In a video with, Tyler Blanchard, Mac was asked on several occasions what he does for work and his source of income to which he doesn’t give a proper response and dodges the question.

Illegal Lotteries and Fake Signatures

According to the Federal Trade Commission (FTC), a lottery consists of three main elements; a valuable prize, random chance, and payment. To run a legal lottery, you must eliminate one of these three factors. According to DogPacks, MrBeast’s lotteries don’t follow these laws and target children to make purchases to get a chance to win a prize.

These “lottery live streams” also had shady practices where they didn’t give the prize in the original time frame and kept changing the rules. One thing to note here is that these live streams date back to when MrBeast hit 40 million subscribers, during a time when “fake giveaways” by subscribing to channels were everywhere on YouTube.

After that DogPack talks about how other members of the crew were using MrBeast’s signature. In one clip, Tyler, a member of MrBeast’s crew, is seen signing “MB,” MrBeast’s signature, on a T-shirt. He then adds his signature and quickly moves the T-shirt out of the frame. This puts into question the authenticity of MrBeast’s signed merch and whether the person behind these signs is him or not.

Are Feastables Really Healthy?

DogPack’s video also shows how MrBeast’s chocolate brand “Feastables” promotes false advertising by calling it “infinitely healthier” than other chocolate brands out there. Back when Festables was introduced the whole “only 5 ingredients” and “no processed ingredients” was true but that’s not the case anymore. When compared to a Hershey’s chocolate bar, Feastables contains more sugar and has 100 more calories.

DogPack also questions some of the advertising tactics for Feastables, including the use of gambling games. However, there is limited evidence to determine whether these games required any payment from customers or if they were simply a marketing strategy to attract more customers by offering free rewards. All of this is no more on the official Feastable’s website anymore.

The Drama Continues

In the last few seconds, DogPack added an old video of MrBeast of what seems like a scripted giveaway. However, MrBeast has already addressed this clip, stating, “The clip was real, and the man did receive the money. However, his original reaction wasn’t good enough to attract viewership“. Since gaining attention for views is crucial for someone starting on YouTube, he asked him to redo his reaction to make it more dramatic and that’s pretty much there is to it.

It appears that DogPack plans to release another part of this video. While many of the claims are based on older content, the video highlights how information on the Internet can be manipulated and fabricated. MrBeast hasn’t officially addressed this video yet but rest assured we will update you as new things pop up.

The post MrBeast Accused of Faking Videos, Rigging Results & Illegal Lotteries appeared first on Appuals.

In this post, we will go over the main causes of the Access 22 issue and step-by-step solutions to each one of these problems. So, if you stay with us till the end you’ll have your Spotify up and running in no time.

What is the Spotify Access 22 Error Code?

The Access 22 error code is an issue exclusive to PC and Mac versions of the Spotify app.  It pops up every time the user tries signing in to their Spotify account, indicating that the user can only access the app if they have the premium version of Spotify.

However, users with premium subscriptions have also faced this error which makes one thing clear: it has nothing to do with having a premium subscription.

What Causes the Spotify Access 22 Error?

One of the main causes of the Access 22 error is using an outdated version of the Spotify app on your computer system. Although the exact cause isn’t identified yet, a Spotify moderator suggested that the issue is sometimes linked to using a version of the Mac or Windows app released before April 2021. Apart from that a few other causes can be:

• Connectivity problems can also be a major cause of the error. Unstable internet connections can disrupt your connectivity to the Spotify servers leading to such errors. Network congestion and weak internet connections are also some other factors to consider.
• Using a VPN can also cause the Access 22 error as when you are using a VPN, security measures within the Spotify app may get triggered and block access to the app. If you are connected to a region where Spotify is unavailable you won’t be able to access it on your system either.
• While cached files can improve your experience by making things load faster, they can also cause minor bugs and errors. This means that having too many cached files or outdated cached data can be a concern.

READ MORE: Spotify Not Working? – Try these 8 Fixes ➜

How to Fix the Spotify Access 22 Error?

While the Spotify Access 22 Error can be frustrating to encounter, there are several workarounds and fixes that can help you get back to enjoying your music quickly. Let’s have a closer look at all 5 fixes.

1. Update Spotify

Since the most common cause of the issue is an outdated app version, the first fix you should try is updating your Spotify to the latest version available. Here’s a step-by-step guide on how to update your Spotify on Windows and Mac:

1. Open up the Spotify app on your Windows or Mac.
   

   

2. Click on the three-dot menu in the top-left corner of the Spotify window.
   

   

3. From the drop-down menu, navigate to Help > About Spotify.
   

   

4. A new window will pop up, displaying the current version of Spotify. If an update is available, you should see a prompt to update Spotify.
   

   

5. Now if you do see a prompt click on it and wait for the update to be downloaded.
   

   

6. Once the update is complete restart Spotify and you should be good to go.

Manually Updating Spotify

You can also manually update Spotify through their website. First, uninstall Spotify by navigating to “Settings” and then “Apps“. Scroll down to find Spotify in the list of apps and click “Uninstall“. After the uninstallation is complete, visit the official Spotify website and download the latest version of the app. Once the download is finished, install the app on your system and complete the setup.

Updating Spotify from the Microsoft Store

If you downloaded Spotify from the Microsoft store you can also update it from there by following these steps:

1. Type in Microsoft Store in the Windows Search bar and open it.
   

   

2. Next, head to your Library from the bottom-left corner and click on Apps.
   

   

3. Click on Get Updates to check for updates for all installed apps, including Spotify.
   

   

4. If Spotify is listed among the apps with available updates, click on the update button next to Spotify to download and install the latest version.

READ MORE: How to Troubleshoot Microsoft Store Not Updating Apps ➜

2. Alternative — Use the Spotify Web Player

If you have updated your Spotify app and are still facing the issue, one quick and simple way to avoid the Access 22 error is to use the Spotify web player rather than the Spotify desktop app. The Spotify web player can be accessed through your browser and since it updates every time you refresh it, you will no longer face the Access 22 error.

However, there are some downsides to using the web player. First and foremost, the web player doesn’t support offline playback so you can’t listen to songs without the internet. On top of that, the performance is also not on par with the desktop app.

READ MORE: How to Fix An Error Occurred in Spotify Web Player? ➜

3. Diagnose Your Internet Connection

If you don’t want to sacrifice performance and features by using the web player, the next thing you can do to make your Spotify app work is to ensure your internet is working smoothly. Check the bars you are receiving on your phone and if you have a wifi connection make sure you are not too far away from the router as wifi signals get weaker as distance to the router increases.

You can perform online speed tests like Fast.com and Ookla to check how well your internet is performing. On the other hand, for PC and laptop users we recommend setting up a wired connection as it’s far more stable and faster compared to a wireless one.

READ MORE: 15 Easy Solutions to Fix Spotify Not Playing Songs [Guide] ➜

4. Clear Cache Data

If you’re using the latest version of the app and still facing the Access 22 error, it could be because of corrupted cache data in the Spotify app. Corrupted cache data can cause your application to think you are using an older version of the app hence causing the Access 22 error. 

To fix this problem you will have to clear cache data. Here is  a step-by-step guide to clearing cache from your Spotify app:

1. Launch the Spotify app and click on your profile in the top right corner.
   

   

2. From the drop-down menu, click on Settings.
   

   

3. Next, navigate to the storage section.
   

   

4. Finally, click the clear cache button to remove previously cached data. Once done, restart Spotify and see if the issue still shows up.
   

   

READ MORE: How to Delete a Playlist in Spotify on Desktop & Mobile [2024] ➜

5. Re-install Spotify

If all the other methods fail it could be that the problem is deep-rooted into the files of your application. For that, you’ll need to re-install the Spotify app.

For Windows

For Windows users, we have already discussed the steps to uninstall and reinstall your Spotify app in Step 1. You can revisit those instructions and follow the steps to reinstall the Spotify app on your Windows computer.

For Mac

For Mac users, start by opening a Finder window. From there, Navigate to “Applications” in the left sidebar. Locate Spotify, right-click on it, and select “Move to Trash“. Afterward, download and install a new copy of Spotify from the official website on your Mac.

READ MORE: What is Spotify Enhance? Here’s How to Use It in 2024 ➜

Enjoy Error Free Music

Encountering errors while trying to listen to music, especially when you want to relax, can be frustrating. While troubleshooting on your own can be annoying, it becomes less of a hassle when the steps are easy, simple, and quick. We hope the steps laid out in our article helped you fix the error in a breeze. Happy streaming!

The post 5 Easy Ways to Fix Spotify Error Code Access Point 22 in 2024 appeared first on Appuals.

What if you pick someone who isn’t ideal? For instance, having two tanks without a healer can be problematic. To help you with that, this article will walk you through the steps to dismiss party members in Baldur’s Gate 3 so that you can have the best options in your arsenal.

Why Dismiss Party Members?

Each companion belongs to a separate class and has specific abilities. Sometimes the current companions you have may not be ideal for your strategies and tactics or may just not fit well into your team. For example, you have 2 wizards but no fighter to carry your offense. In such a case removing a member would be useful to you.

Furthermore, different companions have different strength levels so you may want to replace a current party member to add someone new that can help improve your team and make you stronger.

READ MORE: Lesser Restoration in Baldur’s Gate 3: Everything to Know [2024] ➜

How to Remove Origin Characters from Your Party

Origin characters can’t be removed permanently however removing them temporarily is a feasible option. The first thing you need to do is visit the camp. Then simply walk up to the character you want removed and click on them to initiate a “dialogue sequence”. From here, select the “Dismiss them to your camp” option and they should disappear from your camp as and when you end the dialogue sequence.

These characters end up in the “Withers’ Wardrobe of Wayward Friends” which allows you to bring them back at any point by pressing “Drop” or simply dragging them out. However, keep in mind that this process can’t be done in the danger zones of the map.

Screenshots taken from The Legendary Commander

READ MORE: How to Fix Escape Key Not Working in Baldur’s Gate 3? [2024] ➜

 How to Remove Hirelings From Your Party

Although it takes money to hire them, Hirelings can be removed from your party free of cost. Just walk up to them in camp and ask them to leave your party. They will then return to their planes and will no longer hog a party spot. But keep in mind that if you want to re-add them you will have to spend 100 gold.

READ MORE: How to Fix “Failed to Read PAK Vortex” in Baldur’s Gate 3 ➜

How to Remove A Dead Party Member

To remove a dead party member you will have to revive them first. This can be achieved in multiple ways. If you have a revivify spell in your inventory you can use it to revive the dead member. Paladins and clerics can also learn the revivify spell once they reach level 5.

If all these options are unavailable, then you can pay 200 gold to a wither and have them revive the dead member. If you can’t afford to pay a wither, the last resort is to click on the campfire icon which rests all party members and automatically revives all dead party members. Once they’ve been revived, like with every party member just go up to them in camp and ask them to leave.

READ MORE: FIXED: Baldur’s Gate 3 Mod Manager Can’t Launch Game ➜

How to Remove Multiplayer Characters

Unfortunately, Baldur’s Gate 3 doesn’t offer the players the option to remove multiplayer characters from their party. So, if a friend joins your party you’re stuck with their character for the entire game even if they aren’t online most of the time.

This causes a big problem for players because it limits the number of usable or effective characters you can have in your party. Also, currently, there are no mods available that can solve this issue. The developers should look into this and provide a solution for the community.

READ MORE: How to Fix Currently Syncing Error in Baldur’s Gate 3? ➜

Wrapping Up

To sum up, removing characters from your party in Baldur’s Gate 3 is a straightforward process, but it can significantly impact your game. It’s essential to carefully consider your decision before removing a party member, as each character is unique and contributes differently to your team. Evaluate your strengths and preferences to assemble the best team possible.

The post How to Dismiss Party Members in Baldur’s Gate 3? appeared first on Appuals.